The AQUASOL process simply simulates nature at a much more accelerated rate. (For the diagram, please click here.) Using this process, raw sewage flows directly into the first storage chamber where the excess wastewater due to peak production is temporarily stored, and the concentration of the wastewater is homogenized naturally. Meanwhile, the solid matters such as debris, rubber, hair, grits, etc. are removed and properly stored for later disposal. The sewage then overflows by gravity (natural force) through a series of greatly enhanced biological processes. Each biological process is carried out in a specially designed biological chamber, technically called a "BIOREACTOR". AQUASOL BIOREACTORS use advanced MicroEntrapd biotechnology to create an ideal home to sustain the growth of a high concentration of 'friendly bacteria', which can effectively remove the pollutants. The natural biological purification processes, which usually proceed slowly, are greatly accelerated in AQUASOL BIOREACTORS. Moreover, this is achieved with considerably less sludge produced than comparable systems on the market today.

Briefly, the functions of these series of MicroEntrapd BIOREACTOR's are to accelerate the biological processes to liquefy the organic solids, conversion of the organic compounds into carbon dioxide and conversion of various forms of nitrogen into nitrogen gas. If desired, treated sewage can be effectively disinfected using a very powerful 'pathogen-killer', OZONE, prior to final discharge; the treated wastewater is clear, odorless and free of pathogen. Thus, it can be reused or discharged safely.